Intermediate Shaft Seal and Deflector: Notes
WARNING: This page is about a different variant/trim than selected.
SPECIAL TOOLS CHART
| Handle, Driver 32 in 205-907 |
|
| Installer, PTU Linkshaft Seal 205-883 |
|
| Installer, PTU Linkshaft Seal Dust Shield 205-882 |
|
| Remover, Front Wheel Hub 205-D070 (D93P-1175-B) or equivalent |
|
| Remover, Halfshaft 205-241 |
|
| Remover, Transfer Case Bearing Cup 308-125 (T87P-7120-D) |
|
| Slide Hammer Master Set 100-D112 or equivalent |
GENERAL EQUIPMENT
| 16 mm (5/8 in) washer (used with 308-125) |
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| MERCON® V Automatic Transmission Fluid XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) |
MERCON® V |
| Metal Brake Parts Cleaner PM-4-A or PM-4-B (US); CPM-4 (Canada) |
- |
| Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC |
MERCON® LV |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A |
ESE-M1C171-A |