LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Edge Sport, AWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Charging System & Fuel Control System - 3.7L >> Removal And Installation >> Fuel Pump Control Module >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Disconnect the Fuel Pump Control Module (FPCM) electrical connector.
    3. NOTE: Do not overtighten the fasteners or damage to the module may occur.
  3. Remove the 2 FPCM bolts.
    • To install, tighten to 5 Nm (44 lb-in).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals