Powertrain Control Module (PCM) - 2.0L GTDI: Removal

WARNING: This page is about a different car, the 2013 Lincoln MKX and 2013 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation (PMI) procedure. For additional information, refer to MODULE CONFIGURATION .
Disconnect the 2 PCM electrical connectors.
- Detach the wiring harness retainer from the cowl.
  
  Fig 1: Locating PCM Electrical Connectors
  Courtesy of FORD MOTOR CO.
Remove the 2 nuts and the PCM and bracket assembly.

Fig 2: Locating PCM And Bracket Assembly Nuts
Courtesy of FORD MOTOR CO.
Remove the 3 bolts and remove the PCM from the bracket.

Fig 3: Locating Bolts On PCM Bracket
Courtesy of FORD MOTOR CO.