Section 1876 (HVAC - Climate Control System): Specifications
WARNING: This page is about a different car, the 2013 Lincoln MKX and 2013 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Motorcraft® PAG Refrigerant Compressor Oil YN-12-D | WSH-M1C231-B | 118 ml (4 fl. oz.) |
| Motorcraft® R-134a Refrigerant YN-19 (US); CYN-16-R (Canada) | WSH-M17B19-A | 0.60 kg (21 oz.) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| A/C compressor bolt | 25 | 18 | - |
| A/C compressor fitting nuts-2.0L GTDI (suction and discharge) | 9 | - | 80 |
| A/C compressor fitting bolts-3.5L, 3.7L (suction and discharge) | 9 | - | 80 |
| A/C compressor nut | 25 | 18 | - |
| A/C compressor stud | 9 | - | 80 |
| A/C Condenser bolts | 6 | - | 53 |
| Compressor discharge line bracket nut | 25 | 18 | - |
| Compressor-to-condenser discharge line bracket bolt | 7 | - | 62 |
| Compressor-to-condenser discharge line fitting nut | 8 | - | 71 |
| Condenser fitting bolts (inlet and outlet) | 6 | - | 53 |
| Condenser-to-evaporator line bracket bolt | 9 | - | 80 |
| Evaporator outlet line bracket stud bolt | 11 | - | 97 |
| Heater core and evaporator core housing nuts | 8 | - | 71 |
| High-pressure Schrader-type valve | 3.4 | - | 30 |
| High-pressure service gauge port valve cap | 0.8 | - | 7 |
| Low-pressure Schrader-type valve | 2.26 | - | 20 |
| Low-pressure service gauge port valve cap | 0.8 | - | 7 |
| Radiator bracket bolts | 9 | - | 80 |
| Receiver/drier plug | 3 | - | 27 |
| Thermostatic Expansion Valve (TXV) fitting nut | 8 | - | 71 |