Section 1907 (Power Steering System): Specifications
WARNING: This page is about a different car, the 2013 Lincoln MKX and 2013 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| MERCON® V Automatic Transmission Fluid XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) | MERCON® V | 946 ml (2.0 pt) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| Crossbrace-to-subframe support bracket bolts | 90 | 66 | - | ||
| Inner tie rod | 103 | 76 | - | ||
| Lower bumper-to-subframe washer-nut | 9 | - | 80 | ||
| Outer tie-rod end nuts | 48 | 35 | - | ||
| Power steering fluid reservoir nuts | 8 | - | 71 | ||
| Power steering pump bolts | 25 | 18 | - | ||
| Pressure line bracket bolts | 9 | - | 80 | ||
| Pressure line bracket-to-engine nut (2.0L) | 9 | - | 80 | ||
| Pressure line clamp plate bolt | 26 | 19 | - | ||
| Pressure line-to-steering gear banjo bolt | 48 | 35 | - | ||
| Return line bracket bolts | 9 | - | 80 | ||
| Roll restrictor bolt a | - | - | - | ||
| Roll restrictor heat shield nuts (3.5L and 3.7L) | 9 | - | 80 | ||
| Stabilizer bar link nuts | 48 | - | 35 | ||
| Steering gear extension shaft-to-steering gear bolt | 25 | - | 18 | ||
| Steering gear heat shield bolts (3.5L and 3.7L) | 6 | - | 53 | ||
| Steering gear bolts (1) | - | - | - | ||
| Subframe support bracket bolts | 90 | 66 | - | ||
| Subframe support bracket nuts | 133 | 98 | - | ||
| Subframe mounting nuts | 133 | 98 | - | ||
| Tie-rod jam nuts | 90 | 66 | - | ||
|
|||||