Washer Hose Repair

WARNING: This page is about a different car, the 2013 Lincoln MKX and 2013 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

Locate and verify the leaking washer hose.
Cut the hose cleanly and remove the damaged portion of the washer hose.

Fig 1: Identifying Washer Hose Cutting Dimension
Courtesy of FORD MOTOR CO.
Install a windshield washer hose adapter between the cut ends of the hose.

NOTE: In difficult cases, clamping may be required.

Install a segment of 6.4 mm (0.25 in) inside diameter black rubber hose over the ends of the washer hose, and clamp both ends of the rubber hose using spring clamps.