Information System And Entertainment System DTCS
AUDIO FRONT CONTROL MODULE (ACM)
| DTC | Description | Action |
|---|---|---|
| B1A01: 01 | Speaker #1: General Electrical Failure | For Edge, GO to Pinpoint Test B . For MKX, GO to Pinpoint Test C . |
| B1A01: 11 | Speaker #1: Circuit Short To Ground | For Edge, GO to Pinpoint Test B . For MKX, GO to Pinpoint Test C . |
| B1A01: 12 | Speaker #1: Circuit Short To Battery | For Edge, GO to Pinpoint Test B . For MKX, GO to Pinpoint Test C . |
| B1A01: 13 | Speaker #1: Circuit Open | For Edge, GO to Pinpoint Test B . For MKX, GO to Pinpoint Test C . |
| B1A02: 01 | Speaker #2: General Electrical Failure | For Edge, GO to Pinpoint Test B . For MKX, GO to Pinpoint Test C . |
| B1A02: 11 | Speaker #2: Circuit Short To Ground | For Edge, GO to Pinpoint Test B . For MKX, GO to Pinpoint Test C . |
| B1A02: 12 | Speaker #2: Circuit Short To Battery | For Edge, GO to Pinpoint Test B . For MKX, GO to Pinpoint Test C . |
| B1A02: 13 | Speaker #2: Circuit Open | For Edge, GO to Pinpoint Test B . For MKX, GO to Pinpoint Test C . |
| B1A03: 01 | Speaker #3: General Electrical Failure | For Edge, GO to Pinpoint Test B . For MKX, GO to Pinpoint Test C . |
| B1A03: 11 | Speaker #3: Circuit Short To Ground | For Edge, GO to Pinpoint Test B . For MKX, GO to Pinpoint Test C . |
| B1A03: 12 | Speaker #3: Circuit Short To Battery | For Edge, GO to Pinpoint Test B . For MKX, GO to Pinpoint Test C . |
| B1A03: 13 | Speaker #3: Circuit Open | For Edge, GO to Pinpoint Test B . For MKX, GO to Pinpoint Test C . |
| B1A04: 01 | Speaker #4: General Electrical Failure | For Edge, GO to Pinpoint Test B . For MKX, GO to Pinpoint Test C . |
| B1A04: 11 | Speaker #4: Circuit Short To Ground | For Edge, GO to Pinpoint Test B . For MKX, GO to Pinpoint Test C . |
| B1A04: 12 | Speaker #4: Circuit Short To Battery | For Edge, GO to Pinpoint Test B . For MKX, GO to Pinpoint Test C . |
| B1A04: 13 | Speaker #4: Circuit Open | For Edge, GO to Pinpoint Test B . For MKX, GO to Pinpoint Test C . |
| B1A05: 02 | Speaker #5: General Signal Failure | For Edge, GO to Pinpoint Test B . For MKX, GO to Pinpoint Test C . |
| B1A06: 02 | Speaker #6: General Signal Failure | GO to Pinpoint Test E . |
| B1A56: 21 | Antenna: Signal Amplitude < Minimum | GO to Pinpoint Test A . |
| B1A89: 11 | Satellite Antenna: Circuit Short To Ground | GO to Pinpoint Test J . |
| B1A89: 13 | Satellite Antenna: Circuit Open | GO to Pinpoint Test J . |
| B1D19: 49 | Compact Disc Unit: Internal Electronic Failure | CLEAR the DTCs. REPEAT the self-test. If DTC B1D19: 49 is retrieved again, INSTALL a new Audio Front Control Module (ACM). REFER to Audio Control Module (ACM) . REPEAT the self-test. |
| U0155: 00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test V . |
| U0238: 00 | Lost Communication With Digital Audio Control Module "D": No Sub Type Information |
NOTE:
This DTC is only applicable for vehicles with an audio DSP module. For all others, disregard the DTC. GO to Pinpoint Test Z
. |
| U0253: 00 | Lost Communication With Accessory Protocol Interface Module: No Sub Type Information | GO to Pinpoint Test AA . |
| U0256: 00 | Lost Communication With Front Controls Interface Module "A": No Sub Type Information | GO to Pinpoint Test AB . |
| U0257: 00 | Lost Communication With Front Controls/Display Interface Module: No Sub Type Information | GO to Pinpoint Test AC . |
| U201A: 51 | Control Module Main Calibration Data: Not Programmed | REFER to MODULE CONFIGURATION . |
| U2100: 00 | Initial Configuration Not Complete: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U2101: 00 | Control Module Configuration Incompatible: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U3000: 41 | Control Module: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 41 is retrieved again, INSTALL a new ACM. REFER to Audio Control Module (ACM) . REPEAT the self-test. |
| U3000: 42 | Control Module: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 42 is retrieved again, INSTALL a new ACM. REFER to Audio Control Module (ACM) . REPEAT the self-test. |
| U3000: 96 | Control Module: Component Internal Failure | GO to Pinpoint Test J . |
| U3003: 16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AD . |
| U3003: 17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AE . |
ACCESSORY PROTOCOL INTERFACE MODULE (APIM) DIAGNOSTIC TROUBLE CODE (DTC) LIST - 4.2-INCH (107 MM) SCREEN SYNC®
| DTC | Description | Action |
|---|---|---|
| B1252: 04 | USB Port: System Internal Failure | GO to Pinpoint Test AI . |
| B1252: 11 | USB Port: Circuit Short to Ground | GO to Pinpoint Test AI . |
| B12B8: 04 | USB # 2 Port: System Internal Failure |
NOTE:
This DTC refers to USB port #2 on the APIM itself, which is not used. INSPECT the APIM USB port #2 for damage and remove any debris. CLEAR the DTCs. REPEAT the self-test. If DTC B12B8: 04 is retrieved again, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM)
. REPEAT the self-test. |
| B12B8: 11 | USB # 2 Port: Circuit Short to Ground |
NOTE:
This DTC refers to USB port #2 on the APIM itself, which is not used. INSPECT the APIM USB port #2 for damage and remove any debris. CLEAR the DTCs. REPEAT the self-test. If DTC B12B8: 11 is retrieved again, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM)
. REPEAT the self-test. |
| B1D79: 01 | Microphone Input Circuit: General Electrical Failure | GO to Pinpoint Test R . |
| B1D79: 11 | Microphone Input Circuit: Circuit Short to Ground | GO to Pinpoint Test R . |
| B1D79: 12 | Microphone Input Circuit: Circuit Short to Battery | GO to Pinpoint Test R . |
| B1D79: 13 | Microphone Input Circuit: Circuit Open | GO to Pinpoint Test R . |
| U0140: 00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test T . |
| U0155: 00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test V . |
| U0257 : 00 | Lost Communication With Front Controls/Display Interface Module: No Sub Type Information | GO to Pinpoint Test AC . |
| U0423: 00 | Invalid Data Received From Instrument Panel Control Module: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the APIM or Instrument Panel Cluster (IPC). |
| U2100: 00 | Initial Configuration Not Complete: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U2101: 00 | Initial Configuration Not Complete: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U3000: 04 | Control Module: System Internal Failure | GO to Pinpoint Test AH . |
| U3000: 41 | Control Module: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 41 is still present, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM) . REPEAT the self-test. |
| U3000: 42 | Control Module: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 42 is still present, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM) . REPEAT the self-test. |
| U3000: 88 | Control Module: Bus Off | REFER to MODULE COMMUNICATIONS NETWORK . |
| U3003: 16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AD . |
| U3003: 17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AE . |
ACCESSORY PROTOCOL INTERFACE MODULE (APIM) DIAGNOSTIC TROUBLE CODE (DTC) LIST - 8-INCH (203 MM) TOUCHSCREEN SYNC®
| DTC | Description | Action |
|---|---|---|
| C1001: 01 | Vision System Camera: General Electrical Failure | REFER to PARKING AID . |
| B108E: 01 | Display: General Electrical Failure | GO to Pinpoint Test O . |
| B116A: 01 | Handset Microphone: General Electrical Failure | GO to Pinpoint Test R . |
| B1215: 00 | External Memory Card: No Sub Type Information | For vehicles with navigation, GO to Pinpoint Test M . For vehicles without navigation, GO to Pinpoint Test H . |
| B1252: 11 | USB Port: Circuit Short To Ground | GO to Pinpoint Test H . |
| B12B8: 11 | USB Port #2: Circuit Short To Ground |
NOTE:
This DTC refers to USB port #2 on the APIM itself, which is not used. INSPECT the APIM USB port #2 for damage and remove any debris. CLEAR the DTCs. REPEAT the self-test. If DTC B12B8: 11 is retrieved again, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM)
. REPEAT the self-test. |
| U0140: 00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test T . |
| U0151: 00 | Lost Communication With Restraints Control Module: No Sub Type Information | GO to Pinpoint Test U . |
| U0155: 00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test V . |
| U0162: 00 | Lost Communication With Navigation Display Module: No Sub Type Information | GO to Pinpoint Test O . |
| U016A: 00 | Lost Communication With Global Positioning System Module: No Sub Type Information | GO to Pinpoint Test W . |
| U0184: 00 | Lost Communication With Radio: No Sub Type Information | GO to Pinpoint Test X . |
| U0238: 00 | Lost Communication With Digital Audio Control Module "D": No Sub Type Information | GO to Pinpoint Test Z . |
| U0256: 00 | Lost Communication With Front Controls Interface Module "A": No Sub Type Information | GO to Pinpoint Test AB . |
| U0423: 00 | Invalid Data Received From Instrument Panel Control Module: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the IPC. |
| U1A00: 87 | Private Communication Network: Missing Message | RETRIEVE and FOLLOW other DTCs present in the IPC. |
| U2017: 45 | Control Module Software #2: Program Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2017: 45 is still present, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM) . REPEAT the self-test. |
| U2017: 51 | Control Module Software #2: Not Programmed | PROGRAM the APIM. REFER to MODULE CONFIGURATION . CLEAR the DTC. REPEAT the self-test. If DTC U2017: 51 is still present, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM) . REPEAT the self-test. |
| U2017: 52 | Control Module Software #2: Not Activated | PROGRAM the APIM. REFER to MODULE CONFIGURATION . CLEAR the DTC. REPEAT the self-test. If DTC U2017: 52 is still present, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM) . REPEAT the self-test. |
| U2017: 54 | Control Module Software #2: Missing Calibration | PROGRAM the APIM. REFER to MODULE CONFIGURATION . CLEAR the DTC. REPEAT the self-test. If DTC U2017: 54 is still present, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM) . REPEAT the self-test. |
| U2100: 00 | Initial Configuration Not Complete: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U2101: 00 | Control Module Configuration Incompatible: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U3000: 04 | Control Module: System Internal Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 04 is still present, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM) . REPEAT the self-test. |
| U3000: 41 | Control Module: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 41 is still present, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM) . REPEAT the self-test. |
| U3000: 42 | Control Module: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 42 is still present, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM) . REPEAT the self-test. |
| U3000: 88 | Control Module: Bus Off | REFER to MODULE COMMUNICATIONS NETWORK . |
| U3003: 16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AD . |
| U3003: 17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AE . |
AUDIO DIGITAL SIGNAL PROCESSING (DSP) MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST - THX® AUDIO
| DTC | Description | Action |
|---|---|---|
| B128A: 01 | Speaker #13: General Electrical Failure | GO to Pinpoint Test C . |
| B128A: 11 | Speaker #13: Circuit Short To Ground | GO to Pinpoint Test C . |
| B128A: 12 | Speaker #13: Circuit Short To Battery | GO to Pinpoint Test C . |
| B128A: 13 | Speaker #13: Circuit Open | GO to Pinpoint Test C . |
| B1A01: 01 | Speaker #1: General Electrical Failure | GO to Pinpoint Test C . |
| B1A01: 11 | Speaker #1: Circuit Short To Ground | GO to Pinpoint Test C . |
| B1A01: 12 | Speaker #1: Circuit Short To Battery | GO to Pinpoint Test C . |
| B1A01: 13 | Speaker #1: Circuit Open | GO to Pinpoint Test C . |
| B1A02: 01 | Speaker #2: General Electrical Failure | GO to Pinpoint Test C . |
| B1A02: 11 | Speaker #2: Circuit Short To Ground | GO to Pinpoint Test C . |
| B1A02: 12 | Speaker #2: Circuit Short To Battery | GO to Pinpoint Test C . |
| B1A02: 13 | Speaker #2: Circuit Open | GO to Pinpoint Test C . |
| B1A03: 01 | Speaker #3: General Electrical Failure | GO to Pinpoint Test C . |
| B1A03: 11 | Speaker #3: Circuit Short To Ground | GO to Pinpoint Test C . |
| B1A03: 12 | Speaker #3: Circuit Short To Battery | GO to Pinpoint Test C . |
| B1A03: 13 | Speaker #3: Circuit Open | GO to Pinpoint Test C . |
| B1A04: 01 | Speaker #4: General Electrical Failure | GO to Pinpoint Test C . |
| B1A04: 11 | Speaker #4: Circuit Short To Ground | GO to Pinpoint Test C . |
| B1A04: 12 | Speaker #4: Circuit Short To Battery | GO to Pinpoint Test C . |
| B1A04: 13 | Speaker #4: Circuit Open | GO to Pinpoint Test C . |
| B1A05: 01 | Speaker #5: General Electrical Failure | GO to Pinpoint Test C . |
| B1A05: 11 | Speaker #5: Circuit Short To Ground | GO to Pinpoint Test C . |
| B1A05: 12 | Speaker #5: Circuit Short To Battery | GO to Pinpoint Test C . |
| B1A05: 13 | Speaker #5: Circuit Open | GO to Pinpoint Test C . |
| B1A06: 01 | Speaker #6: General Electrical Failure | GO to Pinpoint Test C . |
| B1A06: 11 | Speaker #6: Circuit Short To Ground | GO to Pinpoint Test C . |
| B1A06: 12 | Speaker #6: Circuit Short To Battery | GO to Pinpoint Test C . |
| B1A06: 13 | Speaker #6: Circuit Open | GO to Pinpoint Test C . |
| B1A07: 01 | Speaker #7: General Electrical Failure | GO to Pinpoint Test C . |
| B1A07: 11 | Speaker #7: Circuit Short To Ground | GO to Pinpoint Test C . |
| B1A07: 12 | Speaker #7: Circuit Short To Battery | GO to Pinpoint Test C . |
| B1A07: 13 | Speaker #7: Circuit Open | GO to Pinpoint Test C . |
| B1A08: 01 | Speaker #8: General Electrical Failure | GO to Pinpoint Test C . |
| B1A08: 11 | Speaker #8: Circuit Short To Ground | GO to Pinpoint Test C . |
| B1A08: 12 | Speaker #8: Circuit Short To Battery | GO to Pinpoint Test C . |
| B1A08: 13 | Speaker #8: Circuit Open | GO to Pinpoint Test C . |
| B1A09: 01 | Speaker #9: General Electrical Failure | GO to Pinpoint Test C . |
| B1A09: 11 | Speaker #9: Circuit Short To Ground | GO to Pinpoint Test C . |
| B1A09: 12 | Speaker #9: Circuit Short To Battery | GO to Pinpoint Test C . |
| B1A09: 13 | Speaker #9: Circuit Open | GO to Pinpoint Test C . |
| B1A10: 01 | Speaker #10: General Electrical Failure | GO to Pinpoint Test C . |
| B1A10: 11 | Speaker #10: Circuit Short To Ground | GO to Pinpoint Test C . |
| B1A10: 12 | Speaker #10: Circuit Short To Battery | GO to Pinpoint Test C . |
| B1A10: 13 | Speaker #10: Circuit Open | GO to Pinpoint Test C . |
| B1A11: 01 | Speaker #11: General Electrical Failure | GO to Pinpoint Test C . |
| B1A11: 11 | Speaker #11: Circuit Short To Ground | GO to Pinpoint Test C . |
| B1A11: 12 | Speaker #11: Circuit Short To Battery | GO to Pinpoint Test C . |
| B1A11: 13 | Speaker #11: Circuit Open | GO to Pinpoint Test C . |
| B1A12: 01 | Speaker #12: General Electrical Failure | GO to Pinpoint Test C . |
| B1A12: 11 | Speaker #12: Circuit Short To Ground | GO to Pinpoint Test C . |
| B1A12: 12 | Speaker #12: Circuit Short To Battery | GO to Pinpoint Test C . |
| B1A12: 13 | Speaker #12: Circuit Open | GO to Pinpoint Test C . |
| U0155: 00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test V . |
| U0184: 00 | Lost Communication With Radio: No Sub Type Information | GO to Pinpoint Test X . |
| U0253: 00 | Lost Communication With Accessory Protocol Interface Module: No Sub Type Information | GO to Pinpoint Test AA . |
| U0256: 00 | Lost Communication With Front Controls Interface Module "A": No Sub Type Information | GO to Pinpoint Test AB . |
| U0257 : 00 | Lost Communication With Front Controls/Display Interface Module: No Sub Type Information | GO to Pinpoint Test AC . |
| U0423: 00 | Invalid Data Received from Instrument Panel Cluster Control Module: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the IPC. |
| U2014: 4B | Control Module Hardware: Over Temperature | The audio DSP module was over-temperature. This may occur during extended use. Audio operation can resume after the audio DSP module cools. CLEAR the DTCs. This is normal operation. |
| U2014: 96 | Control Module Hardware: Component Internal Failure | CLEAR the DTCs. WAIT 5 minutes. REPEAT the self-test. If DTC U2014: 96 is still present, INSTALL a new audio DSP module. REFER to Audio Digital Signal Processing (DSP) Module . REPEAT the self-test. |
| U201A: 51 | Control Module Main Calibration Data: Not Programmed | REFER to MODULE CONFIGURATION . |
| U2100: 00 | Initial Configuration Not Complete: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U2101: 00 | Control Module Configuration Incompatible: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U3000: 04 | Control Module: System Internal Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 04 is still present, INSTALL a new audio DSP module. REFER to Audio Digital Signal Processing (DSP) Module . REPEAT the self-test. |
| U3000: 41 | Control Module: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 41 is still present, INSTALL a new audio DSP module. REFER to Audio Digital Signal Processing (DSP) Module . REPEAT the self-test. |
| U3000: 42 | Control Module: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 42 is still present, INSTALL a new audio DSP module. REFER to Audio Digital Signal Processing (DSP) Module . REPEAT the self-test. |
| U3003: 16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AD . |
| U3003: 17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AE . |
AUDIO DIGITAL SIGNAL PROCESSING (DSP) MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST - SONY® AUDIO
| DTC | Description | Action |
|---|---|---|
| B1A01: 01 | Speaker #1: General Electrical Failure | GO to Pinpoint Test B . |
| B1A01: 11 | Speaker #1: Circuit Short To Ground | GO to Pinpoint Test B . |
| B1A01: 12 | Speaker #1: Circuit Short To Battery | GO to Pinpoint Test B . |
| B1A01: 13 | Speaker #1: Circuit Open | GO to Pinpoint Test B . |
| B1A02: 01 | Speaker #2: General Electrical Failure | GO to Pinpoint Test B . |
| B1A02: 11 | Speaker #2: Circuit Short To Ground | GO to Pinpoint Test B . |
| B1A02: 12 | Speaker #2: Circuit Short To Battery | GO to Pinpoint Test B . |
| B1A02: 13 | Speaker #2: Circuit Open | GO to Pinpoint Test B . |
| B1A03: 01 | Speaker #3: General Electrical Failure | GO to Pinpoint Test B . |
| B1A03: 11 | Speaker #3: Circuit Short To Ground | GO to Pinpoint Test B . |
| B1A03: 12 | Speaker #3: Circuit Short To Battery | GO to Pinpoint Test B . |
| B1A03: 13 | Speaker #3: Circuit Open | GO to Pinpoint Test B . |
| B1A04: 01 | Speaker #4: General Electrical Failure | GO to Pinpoint Test B . |
| B1A04: 11 | Speaker #4: Circuit Short To Ground | GO to Pinpoint Test B . |
| B1A04: 12 | Speaker #4: Circuit Short To Battery | GO to Pinpoint Test B . |
| B1A04: 13 | Speaker #4: Circuit Open | GO to Pinpoint Test B . |
| B1A05: 01 | Speaker #5: General Electrical Failure | GO to Pinpoint Test B . |
| B1A05: 11 | Speaker #5: Circuit Short To Ground | GO to Pinpoint Test B . |
| B1A05: 12 | Speaker #5: Circuit Short To Battery | GO to Pinpoint Test B . |
| B1A05: 13 | Speaker #5: Circuit Open | GO to Pinpoint Test B . |
| B1A06: 01 | Speaker #6: General Electrical Failure | GO to Pinpoint Test B . |
| B1A06: 11 | Speaker #6: Circuit Short To Ground | GO to Pinpoint Test B . |
| B1A06: 12 | Speaker #6: Circuit Short To Battery | GO to Pinpoint Test B . |
| B1A06: 13 | Speaker #6: Circuit Open | GO to Pinpoint Test B . |
| B1A07: 01 | Speaker #7: General Electrical Failure | GO to Pinpoint Test B . |
| B1A07: 11 | Speaker #7: Circuit Short To Ground | GO to Pinpoint Test B . |
| B1A07: 12 | Speaker #7: Circuit Short To Battery | GO to Pinpoint Test B . |
| B1A07: 13 | Speaker #7: Circuit Open | GO to Pinpoint Test B . |
| B1A08: 01 | Speaker #8: General Electrical Failure | GO to Pinpoint Test B . |
| B1A08: 11 | Speaker #8: Circuit Short To Ground | GO to Pinpoint Test B . |
| B1A08: 12 | Speaker #8: Circuit Short To Battery | GO to Pinpoint Test B . |
| B1A08: 13 | Speaker #8: Circuit Open | GO to Pinpoint Test B . |
| B1A09: 11 | Speaker #9: Circuit Short To Ground | GO to Pinpoint Test B . |
| B1A09: 12 | Speaker #9: Circuit Short To Battery | GO to Pinpoint Test B . |
| B1A09: 13 | Speaker #9: Circuit Open | GO to Pinpoint Test B . |
| B1A10: 11 | Speaker #10: Circuit Short To Ground | GO to Pinpoint Test B . |
| B1A10: 12 | Speaker #10: Circuit Short To Battery | GO to Pinpoint Test B . |
| B1A10: 13 | Speaker #10: Circuit Open | GO to Pinpoint Test B . |
| U0155: 00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test V . |
| U0184: 00 | Lost Communication With Radio: No Sub Type Information | GO to Pinpoint Test X . |
| U0253: 00 | Lost Communication With Accessory Protocol Interface Module: No Sub Type Information | GO to Pinpoint Test AA . |
| U0256: 00 | Lost Communication With Front Controls Interface Module "A": No Sub Type Information | GO to Pinpoint Test AB . |
| U0423: 00 | Invalid Data Received from Instrument Panel Cluster Control Module: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the IPC. |
| U2014: 01 | Control Module Hardware: General Electrical Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2014: 01 is still present, INSTALL a new audio DSP module. REFER to Audio Digital Signal Processing (DSP) Module . REPEAT the self-test. |
| U2014: 41 | Control Module Hardware: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2014: 41 is still present, INSTALL a new audio DSP module. REFER to Audio Digital Signal Processing (DSP) Module . REPEAT the self-test. |
| U201A: 51 | Control Module Main Calibration Data: Not Programmed | REFER to MODULE CONFIGURATION . |
| U2100: 00 | Initial Configuration Not Complete: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U2101: 00 | Control Module Configuration Incompatible: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U3000: 41 | Control Module: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 41 is still present, INSTALL a new audio DSP module. REFER to Audio Digital Signal Processing (DSP) Module . REPEAT the self-test. |
| U3000: 42 | Control Module: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2014: 41 is still present, INSTALL a new audio DSP module. REFER to Audio Digital Signal Processing (DSP) Module . REPEAT the self-test. |
| U3003: 16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AD . |
| U3003: 17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AE . |
FRONT CONTROLS INTERFACE MODULE (FCIM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B00D5: 01 | Restraint System Passenger Disable Indicator: General Electrical Failure | CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC B00D5: 01 is still present, INSTALL a new Front Controls Interface Module (FCIM). REFER to Front Controls Interface Module (FCIM) . REPEAT the self-test. |
| B113C: 11 | Hazard Switch Illumination: Circuit Short To Ground | CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC B113C: 11 is still present, INSTALL a new Front Controls Interface Module (FCIM). REFER to Front Controls Interface Module (FCIM) . REPEAT the self-test. |
| B1202: 01 | Restraint System Passenger Enable Indicator: General Electrical Failure | CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC B1202: 01 is still present, INSTALL a new FCIM. REFER to Front Controls Interface Module (FCIM) . REPEAT the self-test. |
| U0155: 00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test V . |
| U0257: 00 | Lost Communication With Front Controls/Display Interface Module: No Sub Type Information | GO to Pinpoint Test AC . |
| U0423: 00 | Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the Instrument Panel Cluster (IPC). |
| U2013: 63 | Switch Pack: Circuit/Component Protection Time-Out |
NOTE:
Do not press any FCIM buttons when carrying out the self-test. CLEAR the DTCs. REPEAT the self-test. If DTC U2013: 63 is still present, INSTALL a new FCIM. REFER to Front Controls Interface Module (FCIM)
. REPEAT the self-test. |
| U201A: 51 | Control Module Main Calibration Data: Not Programmed | REFER to MODULE CONFIGURATION . |
| U3000: 41 | Control Module: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 41 is still present, INSTALL a new FCIM. REFER to Front Controls Interface Module (FCIM) . REPEAT the self-test. |
| U3000: 42 | Control Module: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 42 is still present, INSTALL a new FCIM. REFER to Front Controls Interface Module (FCIM) . REPEAT the self-test. |
| U3003: 16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AD . |
| U3003: 17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AE . |
FRONT CONTROL/DISPLAY INTERFACE MODULE (FCDIM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| U0155: 00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test V . |
| U0184: 00 | Lost Communication With Radio: No Sub Type Information | GO to Pinpoint Test X . |
| U0256: 00 | Lost Communication With Front Controls Interface Module "A": No Sub Type Information | GO to Pinpoint Test AB . |
| U201A: 51 | Control Module Main Calibration Data: Not Programmed | REFER to MODULE CONFIGURATION . |
| U2100: 00 | Initial Configuration Not Complete: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U2101: 00 | Control Module Configuration Incompatible: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U3000: 41 | Control Module: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 41 is still present, INSTALL a new Front Control/Display Interface Module (FCDIM). REFER to Front Controls/Display Interface Module (FCDIM) . REPEAT the self-test. |
| U3000: 42 | Control Module: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 42 is still present, INSTALL a new audio FCDIM. REFER to Front Controls/Display Interface Module (FCDIM) . REPEAT the self-test. |
| U3003: 16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AD . |
| U3003: 17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AE . |
GLOBAL POSITIONING SYSTEM MODULE (GPSM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| U0140: 00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test T . |
| U0155: 00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test V . |
| U0422: 00 | Invalid Data Received from Body Control Module: No Sub Type Information | RETRIEVE and FOLLOW diagnostics for other DTCs present in the Body Control Module (BCM). |
| U0423: 00 | Invalid Data Received from the Control Module: No Sub Type Information | RETRIEVE and FOLLOW diagnostics for other DTCs present in the Instrument Panel Cluster (IPC). |
| U2100: 00 | Initial Configuration Not Complete: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U2101: 00 | Control Module Configuration Incompatible: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U3000: 09 | Control Module: Component Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 09 is still present, INSTALL a new GPSM. REFER to Global Positioning System Module (GPSM) . REPEAT the self-test. |
| U3000: 41 | Control Module: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 41 is still present, INSTALL a new GPSM. REFER to Global Positioning System Module (GPSM) . REPEAT the self-test. |
| U3000: 42 | Control Module: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 42 is still present, INSTALL a new GPSM. REFER to Global Positioning System Module (GPSM) . REPEAT the self-test. |
| U3003: 16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AD . |
| U3003: 17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AE . |
INSTRUMENT PANEL CLUSTER (IPC) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| U0253: 00 | Lost Communication With Accessory Protocol Interface Module: No Sub-Type Information | REFER to INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES . |
| All other DTCs | - | REFER to STEERING COLUMN . |
STEERING COLUMN CONTROL MODULE (SCCM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B1380: 09 | Steering Wheel Right Switch Pack: Component Failure | GO to Pinpoint Test F . |
| B1380: 11 | Steering Wheel Right Switch Pack: Circuit Short To Ground | GO to Pinpoint Test F . |
| B1380: 17 | Steering Wheel Right Switch Pack: Circuit Voltage Above Threshold | GO to Pinpoint Test F . |
| All other DTCs | - | REFER to STEERING COLUMN . |