DTC P0602: Powertrain Control Module (Pcm) Programming Error
P0602 - POWERTRAIN CONTROL MODULE (PCM) PROGRAMMING ERROR
| Description: This DTC indicates a programming error within the vehicle ID (VID) block. | |||
Possible Causes:
|
|||
| Diagnostic Aids: The VID block must be programmed. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Making Changes to the VID Block. If the PCM does not allow reprogramming of the VID block, reflashing of the PCM is required. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||