DTC P0613: Transaxle Control Module (TCM) Processor

P0613 - TRANSAXLE CONTROL MODULE (TCM) PROCESSOR

Description: This DTC indicates a TCM internal error.

Possible Causes:

TCM processor error
TCM A/D converter error
TCM EEPROM error
Damaged TCM

Diagnostic Aids: Clear the TCM continuous DTCs. Repeat the self-test. If DTC P0613 is present again, install a new transaxle. Refer to the appropriate Automatic Transaxle/Transmission article.

Application

Key On Engine Off

Key On Engine Running

Continuous Memory

All

See ⁽¹⁾

See ⁽²⁾

⁽¹⁾	Install a new transaxle. Refer to the appropriate Automatic Transaxle/transmission article.

⁽²⁾	Clear the transaxle control module (TCM) continuous DTCs. Repeat the self-test. If DTC P0613 is present again, install a new transaxle. Refer to the appropriate Automatic Transaxle/transmission article.