Optional Restricted Features

If configured, the audio system limits the volume to 45% of the maximum volume. The message MYKEY VOLUME LIMITED is displayed if an attempt is made to exceed the volume limit of 45%.
If configured, vehicle maximum speed can be limited to 130 km/h (80 mph). Audible (chime) and visual (message center message) warnings are issued when the vehicle speed of 130 km/h (80 mph) is attained. The PCM automatically limits the vehicle speed to not exceed 130 km/h (80 mph).
If configured, audible (chime) and visual (message center message) warnings are issued when the preselected vehicle speed of 75, or 90 or 105 km/h (45, or 55 or 65 mph) is attained.
If configured, the AdvanceTrac® always on feature can be configured to on or off. If configured to always on, the traction control cannot be disabled by the MyKey™ driver when a MyKey™ is being used to operate the vehicle.

NOTE: If programming or configuring a MyKey™, but then decide to clear the key instead, do not turn the key to the OFF position. Follow the Disable MyKey™ Restricted Features procedure to clear the key of any restricted MyKey™ status. If necessary, refer to Information and Message Center in the Description and Operation portion of INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES article for MyKey™ system checks and system warnings displays.

NOTE: The key that is being programmed with the MyKey™ feature must first already be programmed into the Passive Anti-Theft System (PATS).

Insert a programmed PATS ignition key into the ignition lock cylinder and turn the key from the OFF to the ON position. This key must be the one that is being programmed to the MyKey™ restricted status.
Using the message center buttons:
1. Press the SETUP button until PRESS RESET TO CREATE MYKEY appears in the message center display.
2. Press and release the RESET button. HOLD RESET TO CONFIRM MYKEY is displayed.
3. Press and hold the RESET button (for approximately 2 seconds) until MARK THIS KEY AS RESTRICTED is displayed.
4. Wait until KEY RESTRICTED AT NEXT START is displayed, then release the RESET button.
The MyKey™ feature (standard restricted features) is successfully programmed into this particular key. Make sure it is labeled for easy identification. To customize the MyKey™ with the audio volume limited, maximum speed limit, speed alert chimes, and AdvanceTrac® on/off restrictions, refer to CONFIGURING MYKEY™ OPTIONAL RESTRICTED FEATURES .
- If the vehicle is equipped with remote start, also refer to USING MYKEY™ WITH REMOTE START SYSTEMS .