Suspension System - General Information: Specifications
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Ball Joint Deflection | |
| Lower | 0-0.2 mm (0-0.008 in) |
| Front Ride Height | |
| All vehicles | 3.3 mm (0.129 in) ± 8 mm (0.314 in) |
| Rear Ride Height | |
| All vehicles except Hybrid | 94.8 mm (3.732 in) ± 8 mm (0.314 in) |
| Hybrid vehicles | 88 mm (3.464 in) ± 8 mm (0.314 in) |
| Side-to-Side Lean (All Vehicles) | |
| Front | 0 mm (0 in) ± 10 mm (0.393 in) |
| Rear | 0 mm (0 in) ± 10 mm (0.393 in) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft |
|---|---|---|
| Front Suspension | ||
| Strut upper mounting bracket nuts | 40 | 30 |
| Tie-rod jam nut | 40 | 30 |
| Rear Suspension | ||
| Wheel knuckle bolt | 150 | 111 |
NOTE:
All alignment specifications are with the vehicle fuel tank full.
ALIGNMENT SPECIFICATIONS
| Item | LH | RH | Split |
|---|---|---|---|
| Front | |||
| Camber | -0.84° ± 0.75° | -0.84° ± 0.75° | 0.00° ± 0.75° |
| Caster | 1.60° ± 0.75° | 1.60° ± 0.75° | 0.00° ± 0.75° |
| Toe @ curb ride height (positive value is toe in, negative value is toe out) | - | - | 0.23° ± 0.23° |
| Rear | |||
| All vehicles except hybrid | |||
| Camber | 0.00° ± 0.75° | 0.00° ± 0.75° | - |
| Toe @ curb ride height (positive value is toe in, negative value is toe out) | -0.09° ± 0.15° | -0.09° ± 0.15° | -0.18° ± 0.20° |
| Hybrid vehicles | |||
| Camber | -0.1° ± 0.75° | -0.1° ± 0.75° | - |
| Toe @ curb ride height (positive value is toe in, negative value is toe out) | -0.06° ± 0.15° | -0.06° ± 0.15° | -0.12° ± 0.20° |