Pinpoint Test

1. Review the DTCs  from the DSM self-test.

Are DTCs B106F and B1342 present? 

• Yes: CORRECT the cause of any other DTCs  present first. When other DTCs  are corrected, INSTALL a new DSM. REFER to DRIVER SEAT MODULE (DSM) .
• No: GO to 2  .

1. Repair the cause of any DTCs  present, other than DTC B106E. REFER to DTC CHART: DRIVER SEAT MODULE (DSM) .
2. Clear the DTCs  .
3. Using a scan tool, perform the DSM self-test.

Is DTC B106E still present? 

• Yes: The fault causing the output state to be disabled is still present. REPAIR the cause of the concern.
• No: The system is operating correctly at this time. The concern was caused by a fault in one of the output circuits.