General Procedure

NOTE: For specifications refer to the appropriate engine mechanical article. For 2.0L GTDI, refer to the GENERAL SPECIFICATIONS , or for 3.5L Ti-VCT, refer to the GENERAL SPECIFICATIONS tables.

Use a telescoping gauge to determine the ID of the connecting rod bushing, if equipped.

Fig 1: Measuring Internal Diameter Of Connecting Rod Bushing Using Telescoping Gauge
Courtesy of FORD MOTOR CO.
Measure the telescoping gauge with a micrometer. Verify the diameter is within specification.

Fig 2: Measuring Telescoping Gauge Reading Using Micrometer
Courtesy of FORD MOTOR CO.