LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Explorer Base, 2.0 9 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> Component Test(S) >> Connecting Rod Cleaning >> General Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

General Procedure

NOTE: For specifications refer to the appropriate engine mechanical article. For 2.0L GTDI, refer to the GENERAL SPECIFICATIONS , or for 3.5L Ti-VCT, refer to the GENERAL SPECIFICATIONS tables.
  1. NOTE: The connecting rod large end is a matched set. The connecting rod cap must be installed on the original connecting rod in the original position. Do not reverse the cap. Parts are not interchangeable.

    Mark and separate the parts and clean with solvent. Clean the oil passages.

    Fig 1: Locating Oil Passages Between Connecting Rod Large End
    G06289024Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals