LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Explorer Base, 2.0 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (MULTIFUNCTION Electronic Modules) >> Removal And Installation >> Body Control Module B (BCM-B) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Body Control Module B (BCM-B): Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the BCM-B on the BCM-B bracket and install the 2 nuts.
  2. Connect the 2 BCM-B electrical connectors.
  3. Position the BCM-B bracket assembly in place.
    • Vehicle with navigation install the 4 nuts, tightening the rear nuts first.
    • Vehicle without navigation install the 3 nuts, tightening the rear nuts first.
  4. Position the RH luggage compartment trim cover and install the pushpin.
  5. NOTE: If the BCM-B is being replaced, follow this step. If the BCM-B is not being replaced, the procedure is complete.

    Download the module configuration information from the scan tool into the BCM-B. For additional information, refer to MODULE CONFIGURATION .

  6. Carry out the BCM-B self-test (must include an on-demand self-test) and then repeat the self-test to confirm all BCM-B DTCs have been cleared.
scientia non olet · About LEMON Manuals