Torque Specifications
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Part Number | Torque |
|---|---|---|
| Ball joint nut | W714890 | 150 Nm (111 lb-ft) |
| Drain plug (if equipped) | 7H398 | 12 Nm (106 lb-in) |
| Driveshaft-to-output flange bolts | W711918 | 70 Nm (52 lb-ft) |
| Engine roll restrictor-to-transaxle bolts | W715378 | 103 Nm (76 lb-ft) |
| Fill plug | 7860108 | 20 Nm (177 lb-in) |
| PTU bolts | W500741 | 90 Nm (66 lb-ft) |
| PTU output flange nut | 389546 | Refer to OUTPUT SHAFT SEAL |
| PTU cooler heat shield bolts (if equipped) | (part of 7251) | 12 Nm (106 lb-in) |
| PTU support bracket-to-engine bolts | W500324 | 48 Nm (35 lb-ft) |
| PTU support bracket-to-Power Transfer Unit (PTU) bolts | W500324 | 48 Nm (35 lb-ft) |
| PTU temperature sensor (if equipped) | 12A648 | 12 Nm (106 lb-in) |
| Rear engine roll restrictor bolt | W712850 | 90 Nm (66 lb-ft) |