DTC Chart(s): Notes
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
BCM DTC DESCRIPTION
| DTC | Description | Action |
|---|---|---|
| BCM DTCs | BCM DTCs not listed in this chart | MULTIFUNCTION ELECTRONIC MODULES . |
| U1007:31 | Lost Communication With Battery Monitoring Sensor "A": No Signal | GO to PINPOINT TEST J . |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | Sets in the BCM when the BCM detects that battery voltage has dropped below 9 volts from the voltage supply circuit. |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to PINPOINT TEST A . |
PCM DTC DESCRIPTION
| DTC | Description | Action |
|---|---|---|
| PCM DTCs | PCM DTCs not listed in this chart | ELECTRONIC ENGINE CONTROLS . |
| P0562 | System Voltage Low | GO to PINPOINT TEST B . |
| P0563 | System Voltage High | GO to PINPOINT TEST A . |
| P0620 | Generator Control Circuit | The PCM sets this DTC if the GENCOM circuit or "A" sense circuit are open or shorted to ground. |
| P0625 | Generator Field Terminal Circuit Low | GO to PINPOINT TEST D . |
| P0626 | Generator Field Terminal Circuit High | GO to PINPOINT TEST D . |
| P065B | Generator Control Circuit Range/Performance | GO to PINPOINT TEST E . |
| P0A5A | Generator Current Sensor Circuit Range/Performance | GO to PINPOINT TEST I . |
| P0A5B | Generator Current Sensor Circuit Low | GO to PINPOINT TEST I . |
| P0A5C | Generator Current Sensor Circuit High | GO to PINPOINT TEST I . |
| P1397 | System Voltage Out of Self-Test Range | If combined with P0562, GO to PINPOINT TEST B , If combined with P0563, GO to PINPOINT TEST A . |