Powertrain Control Module - 3.5L Ti-VCT, 3.7L Ti-VCT: Removal
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Before beginning any service procedure in this article, refer to SAFETY WARNINGS
. Failure to follow this instruction may result in serious personal injury.
- If servicing the PCM , the module configuration must be retrieved before the PCM is removed. Connect the scan tool to the vehicle. Allow the scan tool to identify the vehicle and obtain configuration data. All PMI information will automatically be retrieved by the scan tool.
- Remove the cowl panel. REFER to COWL PANEL .
- Disconnect the 3 PCM electrical connectors.
- Remove the 2 nuts and the PCM .