LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Explorer Base, 2.0 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 281 (Climate Control System - EMTC) >> General Procedures >> Refrigerant Identification Testing >> Contaminated Refrigerant Handling
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Contaminated Refrigerant Handling

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If contaminated refrigerant is detected, DO NOT recover the refrigerant into R-134a recovery/recycling equipment. Recovery of contaminated refrigerant will contaminate the recovered refrigerant supply and may damage the recovery/recycling equipment.
NOTE: A new suction accumulator or receiver/drier must be installed as directed by the A/C system flushing procedure.
  1. Recover the contaminated refrigerant using suitable recovery-only equipment designed for capturing and storing contaminated refrigerant only.
    • Recover the contaminated refrigerant using suitable recovery-only equipment designed for capturing and storing contaminated refrigerant only.
  2. Determine and correct the cause of the customer's initial concern.
  3. Flush the A/C system.
  4. Dispose of the contaminated refrigerant in accordance with all federal, state and local regulations.