LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F55 >> Repair and Diagnosis >> External Pages >> Different car >> Section 281 (Climate Control System - EMTC) >> General Procedures >> Air Conditioning (A/C) System Recovery, Evacuation and Charging >> Refrigerant System Charging
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Refrigerant System Charging

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the refrigerant system with the correct amount of clean Polyalkylene Glycol (PAG) oil. REFER to REFRIGERANT OIL ADDING .
  2. Connect a 199-00067 or 300-ROB34288 to the low-side and high-side service gauge port valves following the operating instructions provided by the equipment manufacturer.
  3. Set the refrigerant charge amount, and charge the refrigerant system following the instructions provided by the equipment manufacturer.