LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, FWD, 6F55 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Passive Anti-Theft System - Without Intelligent Access >> General Procedures >> Key Programming Using Diagnostic Equipment >> General Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

General Procedure

NOTE: If 8 keys are already programmed, this procedure does not allow any more PATS keys to be programmed without erasing all stored key codes first.
  1. Insert the unprogrammed PATS key into the ignition and turn the key from the OFF position to the RUN position.
  2. From the scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the IDS on-screen instructions to enter PATS security access.
  3. From the scan tool menu select "Program additional ignition key" and follow the IDS on-screen instructions.
  4. The engine should now start with the new PATS key.
scientia non olet · About LEMON Manuals