LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, FWD, 6F55 >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Passive Anti-Theft System - With Intelligent Access >> General Procedures >> Key Programming Using Diagnostic Equipment >> General Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

General Procedure

NOTE: To enter PATS security access if no programmed IA keys are available, start a vehicle session using a tear tag or PCM part number. PATS security access can still be granted even with the ignition off.
  1. Insert the unprogrammed IA key into the backup slot.
  2. From the scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the IDS on-screen instructions to enter PATS security access.
  3. From the scan tool menu select "Program additional ignition key" and follow the IDS on-screen instructions.
  4. NOTE: The engine will not start until there are at least 2 keys programmed.

    The engine should now start with the IDS key.

  5. If it is desired to program an additional key (only up to 4 keys total can be programmed), insert the additional key into the backup slot and repeat Step 3 for the additional key that needs to be programmed.
scientia non olet · About LEMON Manuals