| B1A01:01 |
Speaker #1: General Electrical Failure |
GO to PINPOINT TEST H
. |
| B1A01:11 |
Speaker #1: Circuit Short To Ground |
GO to PINPOINT TEST H
. |
| B1A01:12 |
Speaker #1: Circuit Short To Battery |
GO to PINPOINT TEST H
. |
| B1A01:13 |
Speaker #1: Circuit Open |
GO to PINPOINT TEST H
. |
| B1A02:01 |
Speaker #2: General Electrical Failure |
GO to PINPOINT TEST F
. |
| B1A02:11 |
Speaker #2: Circuit Short To Ground |
GO to PINPOINT TEST F
. |
| B1A02:12 |
Speaker #2: Circuit Short To Battery |
GO to PINPOINT TEST F
. |
| B1A02:13 |
Speaker #2: Circuit Open |
GO to PINPOINT TEST F
. |
| B1A03:01 |
Speaker #3: General Electrical Failure |
GO to PINPOINT TEST G
. |
| B1A03:11 |
Speaker #3: Circuit Short To Ground |
GO to PINPOINT TEST G
. |
| B1A03:12 |
Speaker #3: Circuit Short To Battery |
GO to PINPOINT TEST G
. |
| B1A03:13 |
Speaker #3: Circuit Open |
GO to PINPOINT TEST G
. |
| B1A04:01 |
Speaker #4: General Electrical Failure |
GO to PINPOINT TEST N
. |
| B1A04:11 |
Speaker #4: Circuit Short To Ground |
GO to PINPOINT TEST N
. |
| B1A04:12 |
Speaker #4: Circuit Short To Battery |
GO to PINPOINT TEST N
. |
| B1A04:13 |
Speaker #4: Circuit Open |
GO to PINPOINT TEST N
. |
| B1A05:01 |
Speaker #5: General Electrical Failure |
GO to PINPOINT TEST L
. |
| B1A05:11 |
Speaker #5: Circuit Short To Ground |
GO to PINPOINT TEST L
. |
| B1A05:12 |
Speaker #5: Circuit Short To Battery |
GO to PINPOINT TEST L
. |
| B1A05:13 |
Speaker #5: Circuit Open |
GO to PINPOINT TEST L
. |
| B1A06:01 |
Speaker #6: General Electrical Failure |
GO to PINPOINT TEST I
. |
| B1A06:11 |
Speaker #6: Circuit Short To Ground |
GO to PINPOINT TEST I
. |
| B1A06:12 |
Speaker #6: Circuit Short To Battery |
GO to PINPOINT TEST I
. |
| B1A06:13 |
Speaker #6: Circuit Open |
GO to PINPOINT TEST I
. |
| B1A07:01 |
Speaker #7: General Electrical Failure |
GO to PINPOINT TEST J
. |
| B1A07:11 |
Speaker #7: Circuit Short To Ground |
GO to PINPOINT TEST J
. |
| B1A07:12 |
Speaker #7: Circuit Short To Battery |
GO to PINPOINT TEST J
. |
| B1A07:13 |
Speaker #7: Circuit Open |
GO to PINPOINT TEST J
. |
| B1A08:01 |
Speaker #8: General Electrical Failure |
GO to PINPOINT TEST K
. |
| B1A08:11 |
Speaker #8: Circuit Short To Ground |
GO to PINPOINT TEST K
. |
| B1A08:12 |
Speaker #8: Circuit Short To Battery |
GO to PINPOINT TEST K
. |
| B1A08:13 |
Speaker #8: Circuit Open |
GO to PINPOINT TEST K
. |
| B1A09:11 |
Speaker #9: Circuit Short To Ground |
GO to PINPOINT TEST M
. |
| B1A09:12 |
Speaker #9: Circuit Short To Battery |
GO to PINPOINT TEST M
. |
| B1A09:13 |
Speaker #9: Circuit Open |
GO to PINPOINT TEST M
. |
| B1A10:11 |
Speaker #10: Circuit Short To Ground |
GO to PINPOINT TEST M
. |
| B1A10:12 |
Speaker #10: Circuit Short To Battery |
GO to PINPOINT TEST M
. |
| B1A10:13 |
Speaker #10: Circuit Open |
GO to PINPOINT TEST M
. |
| U0155:00 |
Lost Communication With IPC
Control Module: No Subject Type Information |
GO to PINPOINT TEST AB
. |
| U0184:00 |
Lost Communication With Radio: No Sub Type Information |
GO to PINPOINT TEST AD
. |
| U0253:00 |
Lost Communication With Accessory Protocol Interface Module: No Sub Type Information |
GO to PINPOINT TEST AF
. |
| U0256:00 |
Lost Communication With Front Controls Interface Module "A": No Sub Type Information |
GO to PINPOINT TEST AG
. |
| U0423:00 |
Invalid Data Received from Instrument Panel Cluster Control Module: No Sub Type Information |
REFER to
INFORMATION CENTER - INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES
to RETRIEVE and FOLLOW DTCs
present in the IPC
. |
| U2014:01 |
Control Module Hardware: General Electrical Failure |
CLEAR the DTCs
. REPEAT the self-test. If DTC
U2014:01 is still present, INSTALL a new audio DSP
module. Refer to AUDIO DIGITAL SIGNAL PROCESSING (DSP) MODULE
. |
| U2014:41 |
Control Module Hardware: General Checksum Failure |
CLEAR the DTCs
. REPEAT the self-test. If DTC
U2014:41 is still present, INSTALL a new audio DSP
module. Refer to AUDIO DIGITAL SIGNAL PROCESSING (DSP) MODULE
. |
| U201A:51 |
Control Module Main Calibration Data: Not Programmed |
- This DTC
sets due to incomplete or incorrect PMI
procedures. CHECK the vehicle service history for recent service actions related to the audio DSP
module.
- If there have been recent service actions with the audio DSP
module, REPEAT/PERFORM the PMI
procedure as directed by the diagnostic scan tool. REFER to
PROGRAMMABLE MODULE INSTALLATION (PMI)
.
- If there have been no recent service actions, INSTALL a new audio DSP
module to correct the failure to retain configuration data. REFER to AUDIO DIGITAL SIGNAL PROCESSING (DSP) MODULE
.
|
| U2100:00 |
Initial Configuration Not Complete: No Sub Type Information |
- This DTC
sets due to incomplete or incorrect PMI
procedures. CHECK the vehicle service history for recent service actions related to the audio DSP
module.
- If there have been recent service actions with the audio DSP
module, REPEAT/PERFORM the PMI
procedure as directed by the diagnostic scan tool. REFER to
PROGRAMMABLE MODULE INSTALLATION (PMI)
.
- If there have been no recent service actions, INSTALL a new audio DSP
module to correct the failure to retain configuration data. REFER to AUDIO DIGITAL SIGNAL PROCESSING (DSP) MODULE
.
|
| U2101:00 |
Control Module Configuration Incompatible: No Sub Type Information |
- This DTC
sets due to incomplete or incorrect PMI
procedures. CHECK the vehicle service history for recent service actions related to the audio DSP
module.
- If there have been recent service actions with the audio DSP
module, REPEAT/PERFORM the PMI
procedure as directed by the diagnostic scan tool. REFER to
PROGRAMMABLE MODULE INSTALLATION (PMI)
.
- If there have been no recent service actions, INSTALL a new audio DSP
module to correct the failure to retain configuration data. REFER to AUDIO DIGITAL SIGNAL PROCESSING (DSP) MODULE
.
|
| U3000:41 |
Control Module: General Checksum Failure |
CLEAR the DTC
. REPEAT the self-test. If DTC
U3000:41 is retrieved again, INSTALL a new audio DSP
module. Refer to AUDIO DIGITAL SIGNAL PROCESSING (DSP) MODULE
. |
| U3000:42 |
Control Module: General Memory Failure |
CLEAR the DTC
. REPEAT the self-test. If DTC
U3000:42 is retrieved again, INSTALL a new audio DSP
module. Refer to AUDIO DIGITAL SIGNAL PROCESSING (DSP) MODULE
. |
| U3003:16 |
Battery Voltage: Circuit Voltage Below Threshold |
GO to PINPOINT TEST AH
. |
| U3003:17 |
Battery Voltage: Circuit Voltage Above Threshold |
GO to PINPOINT TEST AI
. |