P0610 - Control Module Vehicle Options Error

P0610 - CONTROL MODULE VEHICLE OPTIONS ERROR

Description: Indicates a powertrain control module (PCM) vehicle options error.
Possible Causes: Aftermarket performance products Module reprogramming Corrupted vehicle identification (VID) data PCM internal software error
Diagnostic Aids: This DTC sets when the PCM detects various VID data that is out of a specified acceptable range. Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) .
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	Refer to the Description, Possible Causes and Diagnostic Aids for the DTC.