P061C - Internal Control Module Engine Rpm Performance
P061C - INTERNAL CONTROL MODULE ENGINE RPM PERFORMANCE
| Description: This DTC sets when a calculation error occurred in the powertrain control module (PCM). | |||
Possible Causes:
|
|||
| Diagnostic Aids:
Verify correct operation of the crankshaft position (CKP) sensor, camshaft position (CMP) sensor and related circuits. Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) . |
|||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||