October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component testing procedure

COMPONENT TESTING PROCEDURE CHART

Circuit to test	Connect self-powered test light or ohmmeter to terminals	Move switch to these positions	A good switch will indicate
Turn signal	2 and 8	Left turn	Closed circuit
Turn signal	3 and 8	Right turn	Closed circuit
Flash-to-pass	6 and 8	Pull and hold lever stalk toward steering wheel	Open circuit
Flash-to-pass	4 and 8	Pull and hold lever stalk toward steering wheel	Closed circuit
High beam	6 and 8	Lever stalk in detent toward front of vehicle	Closed circuit
High beam	4 and 8	Lever stalk in detent toward front of vehicle	Open circuit