Air Handling: Auto

When AUTO is selected:

• the Heating, Ventilation, and Air Conditioning (HVAC) system operates in a manner to achieve and maintain the temperature set by the operator.
• the air inlet door is automatically controlled by the Heating, Ventilation, and Air Conditioning (HVAC) module based on the temperature setting.
• the mode door is automatically controlled by the Heating, Ventilation, and Air Conditioning (HVAC) module based on the temperature setting.
• the temperature blend doors are automatically controlled by the Heating, Ventilation, and Air Conditioning (HVAC) module, based on the temperature setting.
• the A/C  compressor is automatically controlled by the PCM  , based on target evaporator temperature request sent from the Heating, Ventilation, and Air Conditioning (HVAC) module. The A/C  compressor does not operate if the outside temperature is below approximately 4°C (39.2°F).
• the blower motor speed is automatically controlled by the Heating, Ventilation, and Air Conditioning (HVAC) module based on the temperature setting, but can be manually overridden.