DTC U3000 : Control Module: Action
| Failure | Action |
|---|---|
| 42 | CLEAR the DTC and REPEAT the self-test. If the DTC returns, INSTALL a new EPAS gear. REFER to Steering Gear . |
| 46 | GO to PINPOINT TEST B |
| 49 | GO to PINPOINT TEST B |
| 53 | INSTALL a new EPAS gear. REFER to Steering Gear . TEST the system for normal operation. |
| 56 | DIAGNOSE all other PSCM DTCs before progressing. If no other DTCs are present CLEAR this DTC and CYCLE the ignition OFF and ON. REPEAT the self-test. |
| 96 | GO to PINPOINT TEST C |