Parking Aid Module (PAM) DTC Table
PARKING AID MODULE (PAM) DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description | Action |
|---|---|---|
| B1299 | Power Supply Sensor Circuit Short to Ground | GO to Pinpoint Test E . |
| B1342 | ECU is Faulted | CLEAR the DTCs. REPEAT the Parking Aid Module (PAM) self-test. If DTC B1342 is retrieved again, INSTALL a new PAM. REFER to Parking Aid Module (PAM) . CLEAR all DTCs. Test the system for normal operation. |
| B2477 | Module Configuration Failure | The PAM is not configured. REFER to MODULE CONFIGURATION Programmable Module Installation (PMI) to configure the PAM. CLEAR all DTCs. Test the system for normal operation. |
| C1699 | Left Rear Sensor Circuit Short to Vbat | GO to Pinpoint Test C . |
| C1700 | Left Rear Sensor Circuit Failure or Blockage | GO to Pinpoint Test B . |
| C1701 | Left Rear Sensor Circuit Fault | GO to Pinpoint Test D . |
| C1702 | Right Rear Sensor Circuit Short to Vbatt | GO to Pinpoint Test C . |
| C1703 | Right Rear Sensor Circuit Failure or Blockage | GO to Pinpoint Test B . |
| C1704 | Right Rear Sensor Circuit Fault | GO to Pinpoint Test D . |
| C1705 | Rear Center Sensor Circuit Short to Vbat | GO to Pinpoint Test C . |
| C1706 | Rear Center Sensor Circuit Failure | GO to Pinpoint Test B . |
| C1707 | Rear Center Sensor Circuit Fault | GO to Pinpoint Test D . |
| C1742 | Rear Sounder Circuit Failure | GO to Pinpoint Test F . |
| C1743 | Rear Sounder Circuit Short to Vbat | GO to Pinpoint Test F . |
| U0140 | Lost Communication With Body Control Module (GEM) | GO to Pinpoint Test G . |
| U0155 | Lost Communication With Instrument Panel Cluster (IPC) Control Module | GO to Pinpoint Test H . |
| U2051 | One or More Calibration Files Missing/Corrupt | The PAM calibration data is corrupt or the module is not calibrated. REFER to MODULE CONFIGURATION Programmable Module Installation (PMI) to configure the PAM. CLEAR all DTCs. Test the system for normal operation. |