LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Fusion S, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle (6F35) >> Diagnosis And Testing >> Output State Control (OSC) Mode >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Output State Control (OSC) Mode: Procedure

NOTE: Retrieve Continuous Codes and carry out a KOEO and KOER On-Demand Self Test before using any output state control. Any DTCs related to the TR sensor, the OSS sensor or the TSS sensor must be fixed or the TCM will not allow the output state control to operate.

Output state control is used to test various transmission components and functions when the vehicle is in the service bay or being driven on the road. Specific vehicle conditions are required for output state control to control each specific function or component. The following describes which transmission functions and components output state control may control and the specific vehicle conditions necessary for its operation.

scientia non olet · About LEMON Manuals