LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Charging And Controls - 3.7L >> Removal And Installation >> Fuel Pump Control Module >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

NOTE: The Fuel Pump Control Module (FPCM) is located in the spare tire stowage compartment.
  1. Disconnect the FPCM electrical connector.
  2. Remove the 2 nuts and the FPCM.
    • To install, tighten to 8 Nm (71 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals