Disabling AdvanceTrac
WARNING: This page is about a different car, the 2016 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
AdvanceTrac is controlled by the stability-traction control switch in the following manner:
- Momentarily pressing the switch disables only traction control, ESC and RSC remain enabled.
- Pressing the switch and holding it pressed for more than 5 seconds with vehicle speed under 56 km/h (35 mph) disables traction control and ESC, RSC remains enabled.
- When vehicle speed exceeds 56 km/h (35 mph) after the switch was pressed and held for more than 5 seconds, traction control and ESC are enabled but with a higher intervention threshold. RSC remains enabled.
- Pressing the switch twice enables traction control and ESC both with a higher intervention threshold. RSC remains enabled.
- Pressing the switch after one or more features have been disabled enables all 3 features.
Switching the transfer case to 4WD low locked disables all 3 features; traction control, ESC and RSC.