Pinpoint Test B : The Cruise Control Is Inoperative - With Adaptive Steering: Notes
WARNING: This page is about a different car, the 2017 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
Refer to CRUISE CONTROL for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Steering Wheel and Column Electrical Components - System Operation and Component Description .
REFER to: Cruise Control - System Operation and Component Description .
DTC Fault Trigger Conditions - Steering Effort Control Module (SECM)
| DTC | Description | Action |
|---|---|---|
| B137F:11 | Steering Wheel Left Switch Pack: Circuit Short to Ground | A continuous memory DTC that sets when the cruise control switch circuits are shorted to ground. |
| B137F:17 | Steering Wheel Left Switch Pack: Circuit Voltage Above Threshold | A continuous memory DTC that sets when the cruise control switch circuits are shorted to voltage. |
| B137F:2A | Steering Wheel Left Switch Pack: Signal Stuck in Range | A continuous memory DTC that sets when a cruise control switch is stuck in position. |
| B137F:4A | Steering Wheel Left Switch Pack: Incorrect Component Installed | A continuous memory DTC that sets when the SECM detects a switch is installed that does not correspond with the switch configuration in the module. |
Possible Sources
- Wiring, terminals or connectors
- Cruise control switch
- Digital TR sensor
- PCM
- SCCM
- SASM
- SECM
- BPP switch