Component testing procedure
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Left mirror | Selector switch left | ||
| Up | 6 and 3 5 and 1 |
Up | Closed circuit |
| Down | 1 and 6 5 and 3 |
Down | Closed circuit |
| Left | 3 and 8 1 and 6 |
Left | Closed circuit |
| Right | 6 and 3 1 and 8 |
Right | Closed circuit |
| Right mirror | Selector switch right | ||
| Up | 2 and 1 6 and 3 |
Up | Closed circuit |
| Down | 1 and 6 2 and 3 |
Down | Closed circuit |
| Left | 6 and 1 7 and 3 |
Left | Closed circuit |
| Right | 1 and 7 6 and 3 |
Right | Closed circuit |
| Folding mirrors (if equipped) | Selector switch center | ||
| Power mirror fold in | 4 and 3 | Down | Closed circuit |
| Power mirror fold out | 4 and 1 | Up | Closed circuit |