LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1251 (Automatic Transmission External Controls) >> Removal And Installation >> Selector Lever Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Assembly: Installation

WARNING: This page is about a different car, the 2017 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    To install, reverse the removal procedure.

  1. 2.

    Adjust the selector lever cable. REFER to: Selector Lever Cable Adjustment - 6-Speed Automatic Transmission - 6F50/6F55 . REFER to: Selector Lever Cable Adjustment - 6-Speed Automatic Transmission - 6F35 .

  1. 3.

    NOTE: Anytime the parking brake switch electrical connector has been disconnected, the EPB system is deactivated and a DTC is stored in the ABS module. Perform the following step to restore the EPB system and clear the ABS module DTC.

    Apply and release the parking brake twice within 5 seconds, pausing with the switch in the NEUTRAL position for approximately one-half second between each apply and release.

scientia non olet · About LEMON Manuals