LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 889 (Anti-Lock Brake System (Abs) And Stability Control) >> Removal And Installation >> Anti-Lock Brake System (ABS) Module >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

WARNING: This page is about a different car, the 2015 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Electronic modules are sensitive to electrical charges. The Anti-lock Brake System (ABS) module can be damaged if exposed to these charges.

  1. 1.

    Remove the Hydraulic Control Unit (HCU). For additional information, refer to Hydraulic Control Unit (HCU) .

  1. 2.

    Remove and discard the 4 screws.
    • To install, tighten the new screws to 3 Nm (27 lb-in).

  1. 3.

    Remove the ABS module.

  1. 4.

    To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals