Pinpoint Test G : BLIS® And CTA System Cannot Be Turned Off In The IPC Message Center: Notes
WARNING: This page is about a different car, the 2015 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostic Overview
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Service Information for information about these practices.
Refer to VEHICLE EMERGENCY MESSAGING SYSTEM for schematic and connector information.
Normal Operation and Fault Conditions
BLIS® and/or the CTA system are turned off for one key cycle only when using the message center switches. Permanently disabling BLIS® and/or CTA system is carried out in the Integrated Diagnostic System (IDS) programmable parameters menu.
Refer to BLIS® and CTA Message Display in Blind Spot Monitoring .
Possible Sources
- A MyKey® is in use
- Wiring, terminals and connectors
- IPC