Climate Control System: Auto

When AUTO is selected:

• the temperature control setting is manually set to the desired setting.
• the air inlet door actuator is automatically controlled by the HVAC control module based on the temperature setting.
• the defrost/panel/floor mode door actuator is automatically controlled by the HVAC control module based on the temperature setting.
• the A/C request is automatically controlled by the HVAC control module based on the temperature settings. The A/C compressor does not operate if the outside air temperature is below approximately 0°C (32°F).
• The A/C request button and the recirc request button can be manually selected. When manually selected, the A/C indicator does not change state with changing outside air temperature.
• the blower motor is on. The blower motor speed is automatically controlled by the HVAC control module based on the temperature setting, but can be manually overridden.