Component testing procedure
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Switch lock | C535B 1 and C535B 4 | Lock Off | Closed circuit |
| Lock On | Open circuit | ||
| Left front window circuit | C535B 1 and C535A 4 | Up | Closed circuit |
| C535B 1 and C535A 8 | Down | Closed circuit | |
| C535B 1, C535A 4 and C535A 8 | One-Touch Up/Down | Closed circuit | |
| Right front window circuit | C535B 1 and C535A 6 | Up | Closed circuit |
| C535B 1 and C535A 2 | Down | Closed circuit | |
| Left rear window circuit | C535B 1 and C535B 5 | Up | Closed circuit |
| C535B 1 and C535B 6 | Down | Closed circuit | |
| Right rear window circuit | C535B 1 and C535B 7 | Up | Closed circuit |
| C535B 1 and C535B 8 | Down | Closed circuit |