LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1223 (Seating System - Front) >> Description And Operation >> Front Seats - Overview >> Overview
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Seats - Overview: Overview

WARNING: This page is about a different car, the 2017 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

Driver Power Seat - Without Memory 

The 10-way driver power seat is equipped with the following motors:

Driver Power Seat - With Memory 

The power driver seat is controlled by the DSM. The DSM is located on the driver seat track. PMI is required when a new DSM is installed. The DSM hard stop/soft stops must be set/reset any time a new DSM, driver seat track, horizontal motor or driver seat backrest is installed.

The memory system allows automatic positioning of the driver seat to 1 of 3 programmable positions. For information on programming memory positions or recalling a stored memory position, refer to the Owner's Literature.

The driver memory seat is equipped with the following motors:

Passenger Power Seat 

The 6-way passenger power seat is equipped with the following motors:

The 10-way passenger power seat is equipped with the following motors:

Heated Seats 

This system allows on-demand, independent, electrical heating of each front seat.

The heated seat system consists of the following components:

Climate Controlled Seats 

This system allows on-demand, independent, electrical heating/cooling of each front seat.

The climate controlled seat system consists of the following components: