Network Message Chart
WARNING: This page is about a different car, the 2015 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
Module Network Input Messages - ACM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Audio mute | IPC | Data used to command audio mute during possible collision event so that the warning chime can be heard. |
Module Network Input Messages - C-CM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| HUD data | HUD module | Used for HUD module active, available and fault status. |
Module Network Input Messages - HUD
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Forward collision warning HUD flash command | C-CM | Flashes the HUD module LED array when commanded. |
| Ignition status | BCM | Used for ignition switch position input. |
Module Network Input Messages - IPC
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Forward collision warning chime request | C-CM | Data used to command warning chime during possible collision event. When this message is received, the IPC sends the audio mute message to the ACM. |
| Forward collision message display | C-CM | Data used to command warning chime and messages during possible collision event. |
Module Network Input Messages - ABS Module
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Level 1 pre-charge | C-CM | Request for a light braking pre-charge when a collision is possible. |
| Level 2 pre-charge | C-CM | Request for a slightly higher braking pre-charge when a collision is possible and the driver lifts his foot off the accelerator pedal. |
| Full braking | C-CM | Request for full braking when a collision is possible and the driver presses the brake pedal lightly. |