Pinpoint Test K: The One-Touch Up/Down Feature Is Inoperative

K1 DE-INITIALIZE, THEN INITIALIZE THE DOOR WINDOW MOTOR
- De-initialize the suspect door window motor, then carry out the window motor initialization procedure. Refer to WINDOW MOTOR INITIALIZATION .
- Is the one-touch up/down feature operating correctly?
  - Yes : The system is operating normally at this time. The window motor lost initialization.
  - No : GO to K2.
K2 CHECK THE SUSPECT WINDOW CONTROL SWITCH
- Ignition OFF.
- Disconnect: LH Front Window Control Switch C504 or RH Front Window Control Switch C604.
- Carry out the component test for the suspect door window control switch. Refer to OEM COMPONENT TESTING for component testing.
- Did the door window control switch pass the component test?
  - Yes : INSTALL a new LH or RH front window motor. REFER to WINDOW REGULATOR MOTOR - FRONT DOOR . INITIALIZE the front window motor. REFER to WINDOW MOTOR INITIALIZATION . TEST the system for normal operation.
  - No : INSTALL a new LH or RH window control switch. REFER to WINDOW CONTROL SWITCH . TEST the system for normal operation.