Cooling System Flushing
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Flush Kit Hardware Package | 164-R3658 or equivalent | |
| Drain Kit | 164-R3662 or equivalent | |
| Pro flush and Fill Coolant Flush and Fill | 023-00154 or equivalent |
Material
| Item | Specification |
|---|---|
| Premium Cooling System Flush VC-1 |
ESR-M14P7-A |
- Once pressure is released, remove the pressure relief cap.
Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding .
- Remove the thermostat.
- Install the coolant hose connection without the thermostat.
- Use cooling system Flush-All, Flush Kit Hardware Package and Drain Kit to flush the engine and radiator.
Use Premium Cooling System Flush VC-1 or equivalent meeting Ford specification ESR-M14P7A.
- Install the thermostat.
- Fill the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding .
WARNING:
Always allow the engine to cool before opening the cooling system. Do not unscrew the coolant pressure relief cap when the engine is operating or the cooling system is hot. The cooling system is under pressure; steam and hot liquid can come out forcefully when the cap is loosened slightly. Failure to follow these instructions may result in serious personal injury.
NOTE:
Refer to the cooling system Flush-All Operating Instructions for specific vehicle hook-up.