Selecting Parameter Identification (PID)

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Connect the scan tool to the data link connector (DLC). Turn off all accessories. If the vehicle is equipped with a power take off (PTO) system or auxiliary idle control, it must be turned off to carry out the self-tests.

Carry out the necessary vehicle preparation and visual inspection. Refer to QUICK TEST DESCRIPTION .
Refer to the scan tool manufacturers manual for instructions.
Follow the operating instructions from the menu.
Access and select the PIDs to begin monitoring.