LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Taurus Limited, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2229 (Information System And Entertainment System - Am/Fm/Cd) >> Removal And Installation >> Front Display Interface Module (FDIM) >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Module configuration is required when a new Front Display Interface Module (FDIM) is being installed.

    Upload the FDIM configuration information to the scan tool. Refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION SYSTEM .

  2. Remove the mat, the 2 screws, and the instrument panel upper bin.
  3. Remove the 4 screws and the FDIM.
    • Disconnect the electrical connector(s).
    • To install, tighten to 2 Nm (18 lb-in).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals