April 5, 2026: LEMON Manuals is launched! Read the announcement.

Seat Backrest Second Row, 60 Percent: Disassembly

WARNING: This page is about a different car, the 2015 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.

>Disassembly

NOTE: For parts identification and location, refer to Seat - Exploded View, Second Row in this service information.

1.

Remove the 60 percent seat from the vehicle. For additional information, refer to Seat - Second Row in this service information.

2.

Remove the 60 percent seat backrest. For additional information, refer to Seat Backrest - Second Row, 60 Percent in this service information.

3.

Remove the 60 percent backrest cover. For additional information, refer to Seat Backrest Cover - Second Row, 60 Percent in this service information.

4.

Remove the backrest foam pad and heater mat (if equipped).

5.

Remove the safety belt retractor-to-safety belt guide bolt.
- To install, tighten to 40 Nm (30 lb-ft).

6.

Remove the 2 safety belt guide bolts. Remove the safety belt guide and the safety belt retractor.
- To install, tighten to 48 Nm (35 lb-ft).

7.

Remove 3 screws and the hardback panel.

8.

To assemble, reverse the disassembly procedure.