Removal And Installation
WARNING: This page is about a different car, the 2015 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
60 percent shown, 40 percent similar.
- 1.
Remove the rear trim cover accessing the rear seat mounting bolts.- Lift up on each front corner to release the trim cover.
- Remove the trim cover through the rear hatch.
- 4.
- 1.
To install, tighten to 80 Nm (59 lb-ft).
- 2.
To install, tighten to 48 Nm (35 lb-ft).
- 3.
To install, tighten to 48 Nm (35 lb-ft).
- 4.
To install, tighten to 48 Nm (35 lb-ft).
- 1.