Electronic Manual Temperature Control (EMTC): Notes

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: EMTC is not available on hybrid vehicles.

NOTE: When installing a new HVAC module on vehicles equipped with EMTC , the Programmable Module Installation (PMI) procedure must be carried out to configure the new module to the vehicle. Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) .

The HVAC module selections include the following:

Air inlet source (outside or recirculated)
Blower motor speed
Discharge air temperature (temperature blend)
Discharge air location (defrost, panel, floor, panel/floor, defrost/floor)
A/C compressor operation
Rear window defroster operation
Heated seat operation (if equipped)