Component Testing Procedure
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
IGNITION SWITCH - COMPONENT TESTING
| Circuit to test | Connect self powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Starterelay circuit | 4 and 7 | Off | Open circuit |
| ACC | Open circuit | ||
| Run | Open circuit | ||
| Start | Closed circuit | ||
| Run/Start power circuit | 4 and 1 | Off | Open circuit |
| Ace | Open circuit | ||
| Run | Closed circuit | ||
| Start | Closed circuit | ||
| Run/ACC power circuit | 4 and 6 | Off | Open circuit |
| ACC | Closed circuit | ||
| Run | Closed circuit | ||
| Start | Open circuit | ||
| Key reminder circuit | 4 and 5 | Key In | Closed circuit |
| Key Out | Open circuit | ||
| Key removal inhibit circuit | 4 and 3 | - | 65-75 |