Section 1979 (Brake System - General Information): Specifications
WARNING: This page is about a different car, the 2012 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) |
WSS-M6C62-A or WSS-M6C65-A1 | 714 ml (1.5 pt) |
| Metal Brake Parts Cleaner PM-4-A or PM-4-B (US); CPM-4 (Canada) |
- | - |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A |
ESE-M1C171-A | - |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Brake Disc - 2 Piston Caliper | |
| Front brake disc minimum thickness | 28.4 mm (1.118 in) |
| Rear brake disc minimum thickness -- All Vehicles | 17.4 mm (0.685 in) |
| Brake Pads - 2 Piston Caliper | |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 in) |
| Brake pad minimum thickness | 3.0 mm (0.118 in) |
| Brake Disc - 4 Piston caliper | |
| Front brake disc minimum thickness | 30.0 mm (1.181 in) |
| Brake Pads - 4 Piston Caliper | |
| Front brake pad minimum thickness | 1.8 mm (0.071 in) |
| Rear brake pad minimum thickness | 3.0 mm (0.118 in) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| Brake caliper bolts (1) | 33 | 24 | - | ||
| Front brake caliper bleeder screw - 2 piston caliper | 10 | - | 89 | ||
| Front brake caliper bleeder screws - 4 piston caliper | 18 | - | 159 | ||
| Master cylinder brake tube fittings | 25 | 18 | - | ||
| Rear brake caliper bleeder screw - all vehicles | 10 | - | 89 | ||
|
|||||